Spend over £50 & Get free Delivery!

Shopping Cart

0

Your shopping bag is empty

Go to the shop

Cal Aqua Labs Double Counter ER

£29.99

Cal Aqua Labs Double Counter ER CO2 bubble counters allow you to monitor the flow rate of CO2 into your aquarium. Being able to visually monitor the CO2 flow rate helps detect possible drifts due to faulty regulators or needle valves. The bubble counters are attached inline with the CO2...

Cal Aqua Labs Double Counter ER

Cal Aqua Labs Double Counter ER

Cal Aqua Labs Double Counter ER

CO2 bubble counters allow you to monitor the flow rate of CO2 into your aquarium. Being able to visually monitor the CO2 flow rate helps detect possible drifts due to faulty regulators or needle valves. The bubble counters are attached inline with the CO2 line and secured to the outside of the aquarium. Typical bubble counters allow the user to monitor CO2 flow rates up to 4-5 bubbles per second. Flow rates higher than this makes counting, and therefore monitoring, difficult to impossible. Cal Aqua Labs’ Double Counter addresses this issue by offering a unique dual-function design that allows monitoring of both low and high CO2 flow rates within one unit.

The Double Counter ER functions exactly the same as the original Double Counter but has an external port for quick and easy filling.

Over time, water level inside bubble counters will evaporate due to the constant stream of dry CO2 passing through. This requires the user to refill the liquid back to its original level. Traditional bubble counter designs require the users to disconnect the CO2 line from the checker each time it is refilled, which is inconvenient and may eventually loosen the tubing leading to CO2 leaks.

The Double Counter ER can be quickly filled simply by removing the silicone plug, fill, and reinstall the plug without having to disconnect any tubing. It is as easy as that!

Note: More information, including how to relate the high-flow bubble rate to the normal-flow rate, can be found in the FAQ section. Always install a check valve below the bubble counter to prevent water from flowing back into the regulator.

Supplied with 2 suction cups. Check valve not included.

Dimensions:

Length: 95mm
Width: 27mm